User Authentication and Accounting (User Login, Job Accounting) > Apply Limit
Apply Limit
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Item
Immediately
Subsequently
Alert Only
*1 The next job will be prohibited in sending or in storing in the box.
1
2
*1
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the subsequent job will
be rejected.
Job continues while displaying an alert message.
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting] > "Job Accounting
Settings" [Next]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Model Name
TASKalfa 3011i
TASKalfa 3511i
2
Select "Apply Limit" [Change].
Configure the settings.
Select [Immediately], [Subsequently], or [Alert Only] > [OK]
Descriptions
Login User Name
3000
3500
9-50
Login Password
3000
3500