Selecting Installation Position - CDP UPO11-1RT User Manual

2-2 Installation and Setup with UPS
Unpacking & Inspection
1. Remove the battery box from the packing.
Note: The battery box is very heavy, be cautious when unpacking and
lifting the unit to avoid injury.
2. Check the inside package
Battery box unit

Quick guide

Battery connection cable x 1

Detection cable x 1

Ear x 2 & screw x 8

Extended stand


Selecting Installation Position

It is necessary to select a proper environment to install the unit, in order to
minimize the possibility of damage to the battery box and extend the life of
the batteries. Please follow the instructions below:
1. Keep at least 20cm (8 inches) clearance from the rear panel of the unit
from the wall or other obstructions.
2. Do not block the air-flow to the ventilation openings of the unit.
3. Please ensure the installation site environmental conditions are in
accordance with the unit's working specifications to avoid overheat and
excessive moisture.
4. Do not place the unit in a dusty or corrosive environment or near any
flammable objects.
5. This unit is not designed for outdoor use.
1-3K Battery pack rack
Battery connection cable
Detection cable
screws
Extended stand
Ears
www.cdpups.com