Operation With Dvd And Video Cd; Playing A Dvd And Video Cd; General Features; Moving To Another Title - LG LH-C6230 Owner's Manual

Operation with DVD and Video CD

Playing a DVD and Video CD

Playback Setup
DVD
Turn on the TV and select the video input source con-
nected to the DVD/CD/VCR receiver.
Audio system: Turn on the audio system and select
the input source connected to the DVD/CD/VCR
receiver.
Press OPEN/CLOSE to open the disc tray.
1 1
Load your chosen disc in the tray, with the
2 2
playback side facing down.
Press OPEN/CLOSE to close the tray.
3 3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offers a menu.
DVD
Use the 1 1 2 2 3 3 4 4 buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or DISC MENU to return to the menu
screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
22.
otes
If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 23).
DVDs may have a region code.
Your DVD/CD/VCR receiver will not play discs that
have a regional code different from your receiver. The
regional code for this receiver is 2 (two).
28
VCD2.0 VCD1.1

General Features

ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.

Moving to another TITLE

1 /3
When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY, then press the appropriate number
button (0-9) to select a title number.
Press 1 1 2 2 to select a title, then press ENTER.

Moving to another CHAPTER/TRACK

1 /12
DVD VCD1.1
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press .or > briefly during playback to return to
the beginning of the current chapter/track or to select
the next chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3 3 /4 4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9) or press 1 1
2 2 to select the chapter/track, then press ENTER.
otes
For two-digit numbers, press the numbered buttons
(0-9)in rapid succession.
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 22.

Search

DVD VCD2.0
1 Press and hold . or > for about two seconds
during playback.
The receiver will now go into SEARCH mode.
2 Press and hold . or > repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100 (for-
ward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
3 To return to normal play, press PLAY.
DVD
1 /3
VCD1.1