Tuning Into A Station Manually; Tuning Into A Station Automatically; Rds Operation - LG LH-C6230 Owner's Manual

Operation with Radio (Continued)

Tuning into a Station Manually

Press FM/AM on the remote control or on the
1 1
front panel until the frequency band appears on
the display and TV screen.
Press FM/AM on the remote control or on the
2 2
front panel to select the desired band.
Press 4 4 TUNING 3 3 on the front panel or press
3 3
1 1 and 2 2 on the remote control to tune in the
desired station.

Tuning into a Station Automatically

Hold down 4 TUNING 3 on the front panel or hold
down 1 and 2 on the remote control for 1 or 2
seconds, and a station is searched for automatically.
ote
The search may not stop at a station with a very
weak signal.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, MUTING and MUTE indicator appear in
the display.
40

RDS Operation

This unit is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
Now in use in many countries, RDS is a system for
transmitting station call signs or network information, a
description of station programme type text message
about the station or specifics of musical selection and
the correct time.
RDS Tuning
When a FM station is tuned in and it contains RDS
data, the unit will automatically display the station's call
sign and the RDS indicator will light in the Display
Window as well as indicators for the RDS services pro-
gramme (PS) if transmitted by the station.
RDS Display
The RDS system is capable of transmitting a wide vari-
ety of information in addition to the initial call sign that
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name.
Pressing RDS on the remote control enables you to
show the station name.
ote
If the RDS services programme (PS) is not being
transmitted, the Display Window will show a PS
NONE message.