Before Operation - Vcr Part; Video Channel Set; Using Your Receiver For The Very First Time - LG LH-C6230 Owner's Manual

Before Operation - VCR part

Video channel Set

Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from
the DVD/CD/VCR receiver through the RF cable.
If you have used a lead you will not have to tune
SCART
your TV, simply select the AV channel. The AV channel
is already pre-tuned for optimum video playback on your
TV.
Perform the following steps only if interference appears
in the TV picture after you have moved to a different
area or a new station has started broadcasting in your
area, or if you change the connection from RF connec-
tion to AV connection, or vise versa.
Turn on DVD/CD/VCR receiver and TV.
1 1
Set the vacant position 36 on your TV.
2 2
Press POWER on the remote control to enter
3 3
the standby mode (the clock indicator will be
dimmed).
Press and hold PROG
4 4
DVD/CD/VCR receiver for more than 4 secs.
RF 36 will appear in the DVD/CD/VCR receiver display.
The following picture will be displayed on the TV
screen.
RF CHANNEL
P
SET
R
If the picture is snowy, move to step 5. If the picture
is clean, press POWER on the DVD/CD/VCR
receiver to finish.
Press PROG D D or E E on the DVD/CD/VCR receiv-
5 5
er to set the video channel to a vacant position
between 22 and 68 which is not occupied by
any local station in your area.
ote
The RF channel will not change until step 6 has been
executed.
Press POWER on the DVD/CD/VCR receiver to
6 6
store the new RF video channel into the
DVD/CD/VCR receiver memory.
Now tune your TV set to the new DVD+VCR RF
channel.
ote
If the TV picture was clear in step 4, do not retune your
TV.
D D or E E on the
36
i

Using your Receiver for the very first time

For the following steps we assume that you have just
connected your Receiver for the very first time.
To make tuning TV stations an easy task your Receiver
incorporates the Automatic Channel Memory System
(ACMS). This system will automatically tune and store
TV channels in your Receiver.
Make sure that you have correctly installed your
1 1
DVD/CD/VCR receiver.
Press POWER to turn on your DVD/CD/VCR
2 2
receiver.
If the initial Menu Screen doesn't appear on screen,
make sure that you have tuned your TV to a video
channel. Or if this is correct it may mean that your
DVD/CD/VCR receiver is already tuned.
Pr-12
ACMS
Press OK to start the automatic tuning process.
3 3
01 C02
02 C03
03 C04
S
Pr-12
ACMS
Press i to remove the menus from the TV
4 4
screen.
ACMS
OK i
00 PR-01
00 PR-02
00 PR-03
E
i
15