Dvd Or Video Cd Operation; Playing A Dvd And Video Cd; General Features; Moving To Another Title - LG LH-W250SC Owner's Manual

DVD or Video CD Operation

Playing a DVD and Video CD

Playback Setup
DVD
Turn on the TV and select the video input source con-
nected to the DVD/CD Receiver.
Audio system: Turn on the audio system
and select the input source connected to the
DVD/CD Receiver.
Press OPEN/CLOSE (Z) to open the disc tray.
1 1
Load your chosen disc in the tray, with the label
2 2
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
Press OPEN/CLOSE (Z) to close the tray.
3 3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
DVD
Use the b B v V buttons to select the title/chapter you
want to view, then press ENTER to start. Press TITLE
or DVD MENU to return to the menu screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup.
otes
If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 17).
DVDs may have a region code.
Your receiver will not play discs that have a region
code different from your receiver. The region code for
this player is 2 (two).
VCD2.0 VCD1.1

General Features

ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.

Moving to another TITLE

When a disc has more than one title, you can move to
another title as follows:
Press DISP., then press the appropriate numbered
button (0-9) to select a title number.

Moving to another CHAPTER/TRACK

DVD VCD2.0 DivX
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press . or > briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISP. Then, press 3 3 /4 4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
ote
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.

Slow Motion

DVD
Press SLOW -/+ during pause.
1 1
The player will enter SLOW mode.
Use the SLOW -/+ to select the required speed: t
2 2
1/16, t 1/8, t 1/4 or t 1/2 (backward), or T
1/16, T 1/8, T 1/4 or T 1/2 (forward).
To exit slow motion mode, press PLAY.
3 3
ote
Slow motion playback in reverse is not applicable for
Video CD.
DVD
VCD2.0 VCD1.1
19