Dvd And Video Cd Operation; Playing A Dvd And Video Cd; General Features; Moving To Another Title/Group - LG LH-D6530A Owner's Manual

Operation with DVD and Video CD

Playing a DVD and Video CD

Playback Setup
DVD-V
Turn on the TV and select the video input source con-
nected to the DVD/CD receiver.
Audio system: Turn on the audio system and select
the input source connected to the DVD/CD receiver.
Press OPEN/CLOSE to open the disc tray.
1 1
Load your chosen disc in the tray, with the
2 2
playback side facing down.
Press OPEN/CLOSE to close the tray.
3 3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offers a menu.
DVD-V
Use the 1 1 2 2 3 3 4 4 buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or MENU to return to the menu screen.
DVD-A
Use the 1 1 2 2 3 3 4 4 buttons to select an option you
want, then press ENTER to view the option.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
19.
otes
- If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 20).
- DVDs may have a regional code.
Your receiver will not play discs that have a regional
code different from your receiver. The regional code
for this receiver is 1 (one).

General Features

VCD2.0 VCD1.1
DVD-A
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Moving to another TITLE /GROUP
When a disc has more than one title/group, you can
move to another title as follows:

Moving to another CHAPTER/TRACK

When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
For two-digit numbers, press the numbered buttons
(0-9)in rapid succession.

Search

1 Press and hold SKIP/SCAN . or > for about
2 Press and hold SKIP/SCAN . or > repeatedly
3 To return to normal play, press PLAY.
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.

Pause

1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY.
ote
1 /3
DVD-V DVD-A
Press DISPLAY, then press the appropriate number
button (0-9) to select a title/group number.
DVD-V DVD-A VCD1.1
1 /12 1 /3
1/6
Press SKIP/SCAN . or > briefly during
playback to select the next chapter/track or to return to the
beginning of the current chapter/track.
Press . twice briefly to step back to the previous chap-
ter/group/track.
To go directly to any chapter during DVD playback, press
DISPLAY. Then, press 3 3 /4 4 to select the
chapter/group/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
ote
DVD-V VCD2.0 VCD1.1
two seconds during playback.
The receiver will now go into SEARCH mode.
to select the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
ote
DVD-V VCD2.0 VCD1.1
1/6
1 /12
21