About; Default - Hasselblad 503CW User Manual

1

2

1

2

MENU > SETTINGS > About
Occasionally, Hasselblad releases updates to the internal software
("firmware") of the digital capture unit. These updates may fix
small errors and/or add new features. If you need assistance from
Hasselblad technical support it facilitates the situation to know
the serial number and current firmware vision of the unit. To find
this out:
1. Select MENU > SETTINGS > ABOUT. (See also Navigating
the Menu System or details about how to find this setting.)
2. Press  to open the About dialog, which shows the serial
number and firmware version. When you are done reading
the information, press the menu (EXIT) button to return to
the SETTINGS menu. Either move on to another setting by
using the navigator button or press the menu (EXIT) button
again to exit the menu system.
MENU > SETTINGS > Default
The DEFAULT setting will reset all custom settings you have made
back to the original default / factory settings.
To reset all settings:
1. Select MENU > SETTINGS > DEFAULT.
2. Press the OK button and then the EXIT to return.
68