Browse - Hasselblad 503CW User Manual

1
3
 Browse shortcut !
There is also a one-button shortcut
for changing the browse filter.
To use it, press and hold (do not
click!) the Instant Approval button
until the approval status color
appears. Browsing will then only
display the images with that clas-
sification.
2
4
To select the medium to which to save new shots and from which
to browse previous shots:
1. Press the MENU button.
2. Use  and  to select the MEDIA sub-menu.
3. Use the or button to step through the available media
until the name for destination/source you wish to use is
shown.
4. Press the MENU button to exit the menu system and keep
your setting.

Note that you can also select media using just the
buttons while browsing images. This method also enables you to
select a batch as you zoom in from media to batch to thumbnails to
preview. See Navigating Media and Batches for complete details
about this method.

Browse

The browse filter complements the instant-approval system by
enabling you to browse through images according to their approval
status. You have the following choices:
• All: browses all of the images in the current batch, regardless of
their approval status. This is the default.
• Red: browses only red-status images from the current batch. These
are images that you have marked for likely deletion. You might
browse these images to make sure you have not eliminated any
usable images and/or to find images that you can delete to make
room for new shots.
• Green: browses only green-status images from the current batch.
These are either new shots that did not trigger an exposure warn-
ing or shots that you manually assigned to green after overriding
an exposure warning.
• Green & Yellow: browses green and yellow-status images, but
does not show red-status images. These are probably images that
you have either decided to keep or not yet checked for approval
status.
For more information about using the instant-approval system,
please see Using Instant Approval Architecture.
To set the browse filter using the menus:
1. Select the MENU > Browse item. The current setting is dis-
played here.
2. Use the or button to step through the filter options
(described above) until you have selected the filter you wish
to use.
3. Either move on to another setting by using the navigator but-
ton or press the menu button to exit the menu system and
keep your setting.
The appearance of the 'Empty Browse Filter' message signifies that
there are no images with that particular approval status.
50
and