Creating New Batches - Hasselblad 503CW User Manual

1a
2
4
6
8
1b
Example: nine-thumbnail view
3
5
7
9
To select the current medium and view batches using the browse
controls:
1. Press the zoom-out (
the way at the top zoom level. If you start with the single-
image preview view, then you pass through the following
views to get there:
• Single-image preview (as in fig 1a)
• Four-thumbnail view
• Nine-thumbnail view (as in fig 1b)
• Batch list (as in fig 3)
• Media list (as in fig 4)
2. Each medium shows a name, total size and an estimate for
how many images will fit on it. To the right of the medium
name is a set of three colored numbers in parentheses. These
indicate the total number of images of each approval status
(green, yellow and red) that currently exist on that medium.
For example, if you see a card that shows
card contains a total of 26 images: 18 green (approved), 5 yel-
low (unclassified) and 3 red (delete).
If more than one medium is listed, then use  and  to
highlight the medium you wish to use.
3. The currently selected medium shows a blue border.
4. Press the zoom-in (
highlighted medium.
5. A list of batches on this medium now appears. Each batch
appears as a folder icon with a name and the date on which
it was created. As with the media list, you can read the
number of shots of each approval status that are stored in
each batch.
6. As with media, use  and  to highlight the batch you wish
to view.
7. The currently selected batch shows a blue border.
8. Press the zoom-in (
highlighted batch.
9. The nine-thumbnail view of your selected batch now
appears.

Please note the difference between 'selecting' a medium and
'browsing' a batch. Each new image will automatically be saved in
the latest created batch only on the selected medium. You cannot
'select' a batch for storage.

Creating new batches

You can create any number of batches on each medium. To create
a new batch, first make sure you have selected the correct current
medium (see Navigating Media and Batches) and then use the
MENU > STORAGE > BATCH item of the menu system to create the
new batch. See Creating Batches for a detailed procedure.
36
) button repeatedly until you are all
(18 / 5 / 3), then that
) button to zoom-in on the currently
) button to zoom in on the currently