Camera - Hasselblad 503CW User Manual

1
3
5
2
4
6
Setting the options under the User Interface menu
Each of the above items can be set by similar menu navigation.
Language, Power Down and Mark Overex can be set immediately by
the or buttons while Sound, Date & Time and Display require
another move to sub menu for final choice.
Proceed as follows:
1. Press the menu (MENU) button to open the menu.
2. Use  and  to select the SETTINGS sub-menu.
3. Press  to open the SETTINGS menu.
4. Press  to select the USER INTERFACE sub-menu.
5. Use  and  to select the required item.
Press either the or
the case of Language, Power Down and Mark Overex or
press  again to access Sound, Date & Time and Display.
6. Press the EXIT button again to save the new settings and
close the menu.
MENU > SETTINGS > Camera
All Hasselblad V-system cameras can communicate with the dig-
ital capture unit without the need for extra cable connections
except:
• U nmodified 200 series models using CF lenses in C-mode and
the FlexBody accessory.
View cameras (with the appropriate adapter and cables) can also
be used.
Navigating the
CAMERA settings
61
button to make the new settings in