RIDELOC Basic Set-Up of Forks Rebound Fork Set-Up The SCOTT Scale 3 should be adjusted exactly to the individual rider to achieve maximum saftey and fun while riding. Replaceable Rear Dropout SCOTT recommends that all adjustments be carried out by Cable Guides and Cabling.
After choosing the Carbon fibers, the engineers are using specific Chainring size 38T max tools, like FEA software, to map out the carbon lay-up. Thanks to SCOTT's proprietary Max tyre width 2 3/57mm EvoLap-Technology, different forces can be applied on a virtual model and the frame Please note: construction is adjusted accordingly.
• GEOMETRY/TECHNICAL DATA SCALE 3 900 • IMPORTANT! SCOTT Scale 3 is designed around the BOOST platform so many of the fitted parts: cranks/ Seatpost Diameter 31 6mm wheels/dropouts/forks differ from traditional cycle parts. Always consult your authorized Seattube clamp...
BASIC SET-UP OF FORKS Recommended tools for the shock setup: Your SCOTT bike will be supplied with a SAG tool to help set up your bikes suspension, these SAG tools can be easily clipped on the fork body and Fork dust seal.
If your dropout needs to be replaced, we recommend this work should be carried out by your local SCOTT dealer as the rear derailleur may need adjustment, failure to adjust this correctly may result in accident or damage to your bike.
On the carbon SCOTT Scale the cable guides on the headtube can be changed if required The SCOTT Scale has a Press fit PF92 bottom bracket with an inner diameter of 41mm, this so different cable configurations can be used, the inside of the cable guide is stamped with a...
How do you make a claim under this limited warranty? To make a claim under this limited warranty, you must notify SCOTT of the claimed defect within the warranty period and timely return the Product to SCOTT at your expense for What is Covered? inspection.