BB Standards/FD Mounting Details WWW.SCOTT-SPORTS.COM Chainguide Headset Options The Scale bikes should be adjusted exactly to the current rider to BB Cable Guide/Cable Routing maximize safety, comfort and fun while riding. All adjustments should be done at your local SCOTT dealer or by Seattube Clamp following the instructions in this manual.
758.0 mm 29.8 in 786.8 mm 31.0 in 819.7 mm 32.3 in SCOTT’s focus was not only on creating a lightweight frame, but one that was also a stiff and BB OFFSET -44.0 mm -1.7 in -44.0 mm -1.7 in -44.0 mm...
BB STANDARDS/FD MOUNTING DETAILS Scale is available for PressFit 92 Cartridges (PF92). PF BB 92 has a housing width of 92mm (Scale 700) or 89.5mm plus a 2.5mm additional washer (Scale 900, Scale Plus) with an inner diameter for the cartridges of 41mm.
Scale features also an internal cable routing for front and rear derailleur. A special BB Cable Guide was developed for Scale which is available as a spare part at the If you want to replace the cables, please follow these steps: SCOTT distribution with article number 1.
SEATTUBE CLAMP REAR DISC BRAKE MOUNT Please make sure to only use a seatclamp with an inner diameter of 34.9mm (Scale 700 / The rear disc brake on Scale is Postmount Plus) or 38.2mm (Scale 900) and please note the maximum tightening torque on the fixing...
Doing so SCOTT warrants its frames and swingarms for five years (subject to compliance with maintenance ranges, see below) and SCOTT forks (provided it is a fork of SCOTT) for two years for defects in material and/or workmanship in case of purchase of completely assembled bikes.