Installation; Hazardous Area Classifications And Special Instructions For "Safe Use" And Installation In Hazardous Locations For 3661 Positioner; Csa - Fisher 3660 Instruction Manual

Instruction Manual
D101402X012

Installation

Typically, a positioner is shipped with the actuator. If so, the factory mounts and calibrates the positioner and connects
the positioner to actuator tubing. If the positioner is ordered separately from the actuator, perform the appropriate
mounting procedure. Refer to the appropriate instruction manuals for actuator and valve installation procedures.
WARNING
Always wear protective clothing, gloves, and eyewear when performing any Installation procedures to avoid personal
injury.
If installing into an existing application, also refer to the WARNING at the beginning of the Maintenance section in this
instruction manual.
Check with your process or safety engineer for any additional measures that must be taken to protect against process
media.
Hazardous Area Classifications and Special Instructions for "Safe Use" and
Installation in Hazardous Locations for 3661 Positioner
Certain nameplates may carry more than one approval, and each approval may have unique installation/wiring
requirements and/or conditions of "safe use". These special instructions for "safe use" are in addition to, and may
override, the standard installation procedures. Special instructions are listed by approval.
Note
This information supplements the nameplate markings affixed to the product.
Always refer to the nameplate itself to identify the appropriate certification. Contact your
office for approval/certification information not listed here.
WARNING
Failure to follow these conditions of "safe use" could result in personal injury or property damage from fire or explosion,
and area re‐classification.

CSA

Special Conditions of Safe Use
Intrinsically Safe and Non‐incendive
No special conditions for safe use.
Type n
Type n installations must be in a suitable (IP5X) enclosure.
Refer to table 3 for additional approval information.
3660 and 3661 Positioners
September 2015
Emerson Process Management sales
5