Chapter. 1 Overview
Illumination/blinking in operational states
During the Gigabit Ethernet interface initialization LEDs other than POWER (green) and IF
LINK/TRANS (red) blink alternately from right to left and from left to right a number of times.
When Fuctory Default is executed, LEDs other than POWER (green) and IF LINK/TRANS (red)
fade out from right to left a number of times, then blink.
• For how to initialize the Gigabit Ethernet interface, and how to reset to Factory Default, refer to "4.1.
Reset of Gigabit Ethernet IF's IP address and Factory Default", page 63.
10