Identification Of Controls - PROMULTIS PM-TS43A/32 User Manual

8
Remote Sensor
Power Indicator
14 15 16
8 9 10 12
11 13
1.VGA OUT
The currently selected PC IN 1/2/3 signal output.
2.PC IN1/2/3
Enable connection to PC or other external devices
with VGA/AUDIO ports.
3.USB2.0/3.0
Connect USB devices to these ports.
4.HDMI1/2 Input
To connect with those equipments with HDMI or DVI
interface.
HDMI1(MHL): Connect an MHL - enabled device such
as a cell phone to this jack to view the external
device's screen on your screen.
HDMI2(ARC): Connect an ARC-enabled home theater
receiver to this jack.
5. DP(DisplayPort) Input
Connect an external device to DP out jack.

Identification of Controls

TOUCH
OUT 2 AUDIO
7 2
:Switch the screen power on or standby.
1.
2. : Press the button to display input source menu or exit
1
the menu screen.
3. : Press the button to return to previous menu.
2
4. : Press the button to display desktop (Home page) on
3
the screen.
5. : Press the button to open the setting menu.
4
6. : Press the button to turn down the volume.
5
7. : Press the button to turn up the volume.
8.USB(2.0)(for camera): This port is connected to PC (internal
6
OPS) , but is changed to Android if current source is
7
AV, USB or in Home page.
Note: Please open the dust cover before being used.
6.
WIFI antenna for transmitting or receiving
1
network signal.
7.TOUCH1/2 OUT
Output the touch for external devices connected
VGA 1
to PCx or HDMIx port which support touch
system.
2
Note: TOUCH OUT 2 takes precedence over
TOUCH OUT 1 in default. You can define it to in
VGA 2
Lock menu.
8.RS232
3
For service, software upgrades and the other
uses.
HDMI 1
(MHL)
4
9.WAN IN
HDMI 2
The built-in router input port. Connect to the
(ARC)
external network.
5
DP IN
10.LAN OUT
6
The built-in router output port. Connection to
3
USB 2.0
another computer or other Internet enabled
7
TOUCH
OUT 1
devices.
11.AV IN
Connect an AV device to this jack.
12.S/PDIF digital audio output
Connect a digital sound system to this jack.
13.
Connect headphones to this jack. The screen is
the current audio output.
14. Power Switch
Push to (1) to connect the power, push to (O ) to
cut off.
Note:
kept free from coverings so that it can be easily
and conveniently operated.
15. Fuse (12A 250V)
16. AC IN
Plug the AC cord into this jack and into a power
outlet.(~100-240V 50Hz/60Hz)
5
Do not cover the Power switch, it should be