Page 1
• Due to the processes required for manufacturing a large format Projected Capacitive product Promultis will only accept warranty requests for units that have a blemish, mark or smear on the touch skin that is 5% or larger than the total interactive area.
Getting started The following items are included in your product box. USB Memory Stick with Promultis User Manual pdf Warranty Card Remote Control Promultis Manual HDMI Cable AC Power Supply USB Cable For more exciting multitouch products visit www.promultis.info...
Page 3
Slide and open the lid of the battery compartment, then insert two R03 (size AAA) batteries. For more exciting multitouch products visit www.promultis.info or call +44 (0) 239 251 2794 MULTITOUCH SOLUTIONS...
For more exciting multitouch products visit www.promultis.info or call +44 (0) 239 251 2794 MULTITOUCH SOLUTIONS...
Page 5
• Calibration: calibration process to match the physical touch with the Operating System digital coordinates. The configuration tool can be opened via the Displax Connect icon on the desktop. For more exciting multitouch products visit www.promultis.info or call +44 (0) 239 251 2794 MULTITOUCH SOLUTIONS...
Page 6
ON. This stand-by status is only active when ‘DISPLAX Connect’ is open. Invert background: alternate between a white and a black background For more exciting multitouch products visit www.promultis.info or call +44 (0) 239 251 2794 MULTITOUCH SOLUTIONS...
Page 7
L8. Draw block areas: allows disabling the touch on specific Touch Sensor active areas, where you do not want touch being processed. For more exciting multitouch products visit www.promultis.info or call +44 (0) 239 251 2794 MULTITOUCH SOLUTIONS...
Page 8
M5. Drag mode: Calibration of Touch sensor smaller than the LCD. Please refer to the advanced calibration chapter. M6. Touch Test: Touch Test app. For more exciting multitouch products visit www.promultis.info or call +44 (0) 239 251 2794 MULTITOUCH SOLUTIONS...
Page 9
N5. Load firmware: allows to load a firmware file to the Touch Controller. N6. Factory reset: sets the Touch Controller to its default settings. For more exciting multitouch products visit www.promultis.info or call +44 (0) 239 251 2794 MULTITOUCH SOLUTIONS...
Page 10
O5. Stop: stops sending TUIO events from the chosen device to the defined client. Touch Test: Touch Test app. Hide Menu: Hides ‘DISPLAX Connect’. For more exciting multitouch products visit www.promultis.info or call +44 (0) 239 251 2794 MULTITOUCH SOLUTIONS...
Page 11
Fixed and Float menu: Transition between the fixed and the floating ‘DISPLAX Connect’ view. For more exciting multitouch products visit www.promultis.info or call +44 (0) 239 251 2794 MULTITOUCH SOLUTIONS...