Menu List - PROMULTIS PM-TS43A/32 User Manual

Adjusting Picture mode
Adjusting Sound mode

Menu List

Picture Mode Select your favourite picture mode for each input [Standard] /
[Soft] / [User] / [Game] / [Writing] / Dynamic].
Adjust the contrast.
Contrast
Brightness Adjust the brightness.
Adjust the image hue. (Only for NTSC system)
Hue
Sharpness Adjust the sharpness.
Adjust the color saturation.
Saturation
Backlight
Set up the overall brilliance of the screen.
Energy Save
The backlight brightness is decreased.
Adjust the screen size.
Clock
Adjust the focus of stable images.
Phase
H-Position Move the image right or left.
V-Position Move the image up or down.
Auto Adjust
Automatically adjust the image settings such as position and phase.
Color Temperature
Select the color temperature.
If you select User, you can set the level of the Red/Green/Blue as
your desired.
Zoom Mode
Select the aspect ratio (display proportions) according to your
video signal type or personal preference.
OverScan
Adjust the reproduction ratio, you may activate this function to
obtain a cleaner picture.
MFC Frame rate up conversion. (Only for 4K model.)
Image NR
Turn on/off the noise reduction mode to reduce picture noise.
Select your favourite sound mode for each input [Standard] / [Music] /
Sound Mode
[Movie] / [Sports] / [User].
Adjust Bass (low sounds) .
Bass
Adjust Treble (high sounds).
Treble
Balance Adjust volume level of right and left speakers.
AVC
Select [On] to equalize overall volume levels across all channels.
Select [Off] to turn off the auto volume control.
Surround Turn the Surround sound effect on or off.
SPDIF Output
Select the digital audio output mode for S/PDIF.
(digital signal only)
Select [RAW] to output audio signal as its original format.
Select [PCM] to output audio signal by PCM format.
SPDIF Volume Adjust SPDIF volume.
Alone Turn off the picture on your monitor and listen to the program audio only.
Wake up by any key or touch with two or more fingers.
19