Template Numbers; Optional Dustfree™ Magnetic Templates - SCANVIEW ScanmateF8+ Operator's Manual

Table of Contents

Advertisement

TEMPLATE NUMBERS

The code numbering system at the end of each template is designed for use
with the ScanFlow System. This is a high-productivity function that is
integrated into ScanView's ColorQuartet scanning and separation software.
Numbering the templates allows the ScanFlow System to recognize each
template and automatically carry out the scans that have been prepared
for it when the template is mounted in the scanner.
• The right-hand line of circles functions as a code for the template type so
the scanner knows which template format is being used.
• The left-hand line of circles is used for custom-numbering the templates
within each type. To select a given number, press out the relevant circle(s).
Examples: for number 1, press out 1; for number 4, press out 1 and 3; for
number 16, press out 1, 5 and 10; and so on.
Circles for
numbering the
individual
templates
Optional DustFree™ magnetic templates
ScanView's optional DustFree™ magnetic template system can be used to
mount transparencies in the scanner without any glass plates and without
using any tape. The system consists of a basic frame that is placed in the
scanner instead of the mounting plate and several magnetic template
"sandwiches" that are inserted in the frame (see illustration below).
Templates are available for a number of standard transparency sizes. The
magnetic templates remove the risk of Newton rings as well as much of the
risk of dust and dirt. For more information, please contact your local
ScanView dealer.
1
2
3
5
10
20
1
9
5
2
6
10
ScanMate F6 / ScanMate F8 Plus • Operator's Manual
Handling originals and mounting plates
Template
identification
code
4•5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ScanmateF8+ and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Scanmatef6

Table of Contents