Reset Setting - Konica Minolta BIZHUB C250 User Manual

Utility

Reset Setting

Parameter
System Auto Reset
Auto Reset
Job
Reset
C250
Description
Specify the desired length of time until
the automatic system reset operation is
performed.
• Priority Mode:
Select the setting ("Copy", "Scan" or
"Fax") for the mode that the machine
enters when the automatic system re-
set operation is performed.
• System Auto Reset Time:
Specify the setting (between 1 and 9
minutes or "OFF") for the desired
length of time until the automatic sys-
tem reset operation is performed.
Select the setting (between 1 and 9 min-
utes or "OFF") for the desired length of
time until the automatic panel reset op-
eration is performed for each mode
(Copy, Scan and Fax).
When ac- Select whether or not the settings are re-
count is set when the user has changed.
changed This machine detects that the user has
changed when the optional key counter
has been removed or when the [Access]
key is pressed after entering user au-
thentication and account track informa-
tion.
When orig- Select whether or not the settings are re-
inal is set set when a document is loaded into the
on ADF ADF.
When Next Staple Setting:
Job is se- Select whether the same Staple setting
lected from the previous job is set or the setting
is canceled when that job begins and the
settings for the next job can be speci-
fied.
Original Set/Bind Direction:
Select whether the same Original Direc-
tion and Margin settings from the previ-
ous job are set or the settings are
canceled when that job begins and the
settings for the next job can be speci-
fied.
Reset Data After Job:
Select whether the same settings for a
scan operation or for a fax transmission
from the previous job are set or the set-
tings are canceled when that job is com-
pleted and the settings for the next job
can be specified. (However, even if
"OFF" is selected, the destination is
cleared.)
12
Default Setting
Priority mode:
Copy
System Auto Reset
Time:
1 minute
Copy: 1 minute
Scan: 1 minute
Fax: 1 minute
Reset
Do Not Reset
OFF
OFF
ON
12-31