To Make Sample Copies - Konica Minolta BIZHUB C250 User Manual

Application functions

To make sample copies

1
Touch [Sample Copy] in the Darker ↔ Lighter (Brightness) screen.
The Sample Copy screen appears.
2
Load paper of a size listed under "Paper that can be used" into the pa-
per tray.
3
Place the document within the sample area of the original glass.
4
Press the [Start] key.
Note
After the sample copy is printed, the parameter screen appears again.
Each sample copy that is printed is counted in the print counter.
C250
8
8-53