Before connecting the Baby Bottle Warmer to the mains, check to ensure that the mains outlet is 230V AC. Place the Baby Bottle Warmer out of the reach of children and on a dry, non-slip, horizontal surface. Turn the click-step control knob 4 to the left to the "." (OFF) position.
Turn the click-step control knob 4 to the left to the "." (OFF) position. Connect the bottle warmer to the mains socket. The indicator lamp lights green. Fill the beaker with 10 or 20ml water by using the water cup of the ring 6.The content is depending on the bottle filling and...
Therefore always control the end temperature and adjust the setting of the knob. Warning! When you leave the bottle in the bottle warmer after it is heated up, the temperature might increase a few degrees. Warming baby food jars Turn the click-step control knob 4 to the left to the "." (OFF) position.
Never immerse the Baby Bottle Warmer in water. Do not use cleaning or scouring agents. Warning: If a fault occurs, consult a Philips' service centre. Under no circumstances should you try to repair the Bottle Warmer yourself; do not dismantle. Servicing should be performed by qualified service personnel only.
ENGLISH Technical Specifications Power supply (mains): Power consumption (mains): Operational ambient temperature: Protection: Problem solving Problem Temperature too low. Temperature too high. The jar has not heated correctly. Unit does not warm up. The indicator light switches on and off while keeping warm.
ENGLISH Guarantee & service If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.