Jenn-Air jis1450d User Manual page 23

Problem
Is the display flashing "F" or "C" and numbers? If "F" or "C" and a number are alternately flashing on the display, refer to the
following for possible solutions:
Cooktop has turned off
and is beeping every
10 seconds
F42, F43
C81, C82, C83
F12, F21, F25, F36, F37,
F40, F47, F56, F58, 560,
F61, F62, F63, F64
Clean cycle did not work
on all spills
Mineral deposits are left
on the oven bottom after
the Clean cycle
Oven cooking results not
what expected
Possible Causes and/or Solutions
An object, liquids, or soils are putting pressure on the control panel - Thoroughly wipe or remove
any object on touch keys.
The power voltage is too low or too high - Turn off the cooktop. Wait 5 seconds, and then turn it back
on. If this continues, contact a qualified electrician.
The surface cooking area has overheated - The surface cooking area automatic shutoff was activated.
Wait 5 minutes for it to cool down, and then turn it back on.
Call for service. See the "Warranty" section for contact information.
Several cooking cycles between Clean cycles or spills on oven walls and doors - Run additional
Clean cycles. Use the AquaLift
or affresh Cooktop Cleaner can be used for stubborn soils. See the "Accessories" section for more
®
information.
Tap water was used in the Clean cycle - Use distilled or filtered water in the Clean cycle.
To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to
thoroughly remove any vinegar residue.
Range is not level - Mineral deposits will collect on dry areas of the oven bottom during the Clean cycle.
Level the range. See the Installation Instructions.
To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to
thoroughly remove any vinegar residue.
Range is not level - Level the range. See the Installation Instructions.
The set temperature was incorrect - Double-check the recipe in a reliable cookbook.
Oven temperature is calibrated incorrectly - See "Oven Temperature Offset Control" in the "Electronic
Oven Controls" section.
Oven was not preheated - See "Baking and Roasting" section.
Racks were positioned improperly - See "Positioning Racks and Bakeware" section.
Not enough air circulation around bakeware - See "Positioning Racks and Bakeware" section.
Batter distributed unevenly in pan - Check that batter is level in the pan.
Darker browning of food caused by dull or dark bakeware - Lower oven temperature 25°F (15°C)
or move rack to a higher position in the oven.
Lighter browning of food caused by shiny or light-colored bakeware - Move rack to a lower position
in the oven.
Incorrect length of cooking time was used - Adjust cooking time.
Oven door was not closed - Be sure that the bakeware does not keep the door from closing.
Oven door was opened during cooking - Oven peeking releases oven heat and can result in longer
cooking times.
Rack is too close to bake burner, making baked items too brown on bottom - Move rack to higher
position in the oven.
Pie crusts browning too quickly - Use aluminum foil to cover the edge of the crust and/or reduce
baking temperature.
Temperature scale was changed from Fahrenheit to Celsius - Foods are overdone or burnt even at
low temperatures. See "Fahrenheit and Celsius" in the "Electronic Oven Controls" section.
Technology Cleaning Kit. affresh
®
23
Kitchen and Appliance Cleaner
®