Install And Turn On Dfr7; Install/Power On; Windshield; Dashboard - Uniden DFR7 User Manual

Long range radar/laser detector

Hide thumbs Also See for DFR7:

Table of Contents

INSTALL AND TURN ON DFR7

You can mount the DFR7 on the windshield (bracket included) or on the dashboard (hook and loop tape

included).

When you mount the DFR7 on the windshield, mount it in the middle of the windshield between the driver and

passenger. Be sure there are no obstructions and that there is a clear view through the back window.

1. Attach the rubber suction cups to the bracket and push the cups firmly onto the windshield.

2. Slide the unit onto the bracket until it clicks into place.

3. Plug the power cord RJ45 connector into the DFR7 and plug the cigarette lighter adapter into the vehicle's

cigarette lighter.

4. The DFR7 automatically turns on and runs through a self test cycle.

Release the DFR7 from the bracket by pressing the Eject key on top of the detector.

The same types of mounting requirements for the windshield apply for mounting the unit on the dashboard.

1. Attach the unit to the dashboard using the hook and loop fastener tape.

2. Plug the power cord RJ45 connector into the DFR7 and plug the cigarette lighter adapter into the vehicle's

cigarette lighter.

3. The DFR7 automatically turns on and runs through a self test cycle.

Pull the bracket from the dashboard, separating the hook and loop tape.

DFR7 Radar Detector

Windshield Mounting Bracket

12V DC Power Cord with RJ45 Connector

Hook and Loop Fastener Tape

Spare Fuse for DC Power Cord

Owner's Manual

- 6 -

Not Shown:

Table of Contents

Show Quick Links

Table of Contents