Connection; Connecting To Power - Eneo VKC-1353 Installation And Operating Instructions Manual

(4) Power Input Terminal
Used to connect an 4VAC or VDC power source.
(5) Video Out jack
Connect to the video input connector of monitor. This jack outputs a composite video signal.
Use a coaxial cable for connection.

4. Connection

4.1. Connecting to Power

Each model has different power specification, please check the name of the model and power specification before
connecting to power source. Please refer to the sticker identifying the model, which is attached on the product, for
power specification.
24VAC/12VDC Power
• The wire is nob -polarized.
• Use 4VAC power source or VDC power source.
NOTES:
• Be sure to connect power after all the installation is done.
• Note that AC adaptor is not supplied with camera.
• Use only 24VAC / 12VDC UL listed class 2 power supply.
• Do not use power sources other than that specified.
4