Batteries; Lighting Instructions - Patio Glow 98300 Assembly Instructions Manual

Make sure the control knob is in the "OFF" position. Unscrew the
push button cap on the ignition module located on the control
panel to access the battery compartment. The ignition module
requires one Alkaline AAA size battery (1.5V). The negative (-)
end goes in first. See Figure 10. Dispose of battery safely.
Battery may explode or leak if charged or disposed of in fire.
Make sure of the polarity. The battery included is mercury and
.
cadmium free
CAUTIONS: BATTERY INSTRUCTIONS

Always purchase the correct size and grade of battery most suitable for the intended use.

Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries
of different types.

Clean the battery contacts and also those of the device prior to battery installation.

Ensure the batteries are installed correctly with regard to polarity (+ and -).

Remove batteries from equipment which is not to be used for an extended period of time.

Remove used batteries promptly.
For recycling and disposal of batteries to protect the environment, please check the internet or your local phone
directory for local recycling centers and / or follow local government regulations.
Warning: If these instructions are not followed exactly, a fire or explosion may result
causing property damage, personal injury or loss of life.
1. Make sure the control knob is in the "OFF" position. See Figure 11. Open the
tank valve all the way.
IGNITER BUTTON
2. Push in the igniter button. You will hear a slight clicking sound. With the igniter
button pushed in, push and turn the control knob to the "ON" position. the fire
should light within a few seconds. Once the flame is lit, release the igniter button
Oct-01-2014

BATTERIES

LIGHTING INSTRUCTIONS

Figure 11
9
IGNITION
MODULE
Figure 10
CONTROL KNOB