Table of Contents
Advertisement
and continue to hold the control knob in for 10 to 15 seconds. Release the control
knob. The control knob should pop back out and then remain lit.
Note: If the fire does not light, turn the knob to the "OFF" position and wait five (5)
minutes before trying again.
4. To turn down the flame, push the control knob in slightly and turn to Medium
(medium or Low (small flame).
5. To shut down the fire pit, turn the control knob to the "OFF" position and turn off
the tank valve.
1. Place the burner cover on the table top as shown in Figure12.
WARNING: BEFORE PLACING THE BURNER COVER ON, MAKE SURE THE FIREPIT
HAS BEEN SHUT OFF AND THE BURNER HAS COMPLETELY COOLED DOWN.
The flames should look like those in Figure 13. To clean the burner, use a soft brush after the
burner has cooled completely. Never use a vacuum cleaner on the burner. It is recommended
to store the fire pit indoors during winter if it will be subjected to freezing temperatures. The LP
cylinder must be disconnected and removed from the appliance before the appliance can be
stored indoors.
Oct-01-2014
BURNER COVER ASSEMBLY
MAINTENANCE
Figure 12
Figure 13
10
Hide quick links:
Advertisement
Table of Contents
