Canon PowerShot G11 Service Manual page 83

<Note on Reassembling>
(1) Attach the IRING BARRIER as shown in the figure below.
(2) Attach the BARRIER PLATE 2 and BARRIER PLATE SPRING 1 as shown in the figure below.
Note on Reassembling (1)
Opening
Section A
STEP 1
Insert the section A into the
leftmost section of the opening.
Note on Reassembling (2)
BARRIER PLATE 2
BARRIER PLATE
SPRING 1
Hole
IRING BARRIER
STEP 1 Attach the BARRIER PLATE
SPRING 1 to the BARRIER
PLATE 2 and insert them into the hole.
IRING BARRIER
IRING BARRIER
STEP 2
BARRIER
PLATE 2
BARRIER PLATE
SPRING 1
Hole
31
Rib
Rib
Rotate the IRING BARRIER in the arrow
direction and engage it with four ribs.
IRING BARRIER
Fix the BARRIER PLATE
STEP 2
SPRING 1 to the hook.
STEP 3
Make sure that each part can move
as shown in the figure.
BARRIER PLATE
SPRING 1