Connectors For Fpc Board - Canon PowerShot G11 Service Manual

1.4 Connectors for FPC Board

This product uses five types of connectors for the FPC board.
1 Type A
The contact-
piece should
face upwards
Unconnected state
3 Type C
Unconnected state
5 Type E
Unconnected state
CAUTION:
1. For the connectors of Type B, make sure to set them to the unlocked state before removing and inserting the
FPC board. After the FPC board is inserted, set them to the locked state.
2. For details on how to attach/detach the type D & E connectors, refer to "3.5 Separation of LCD ASS'Y" for type
D and "3.6 Disassembling of LCD ASS'Y" for type E.
3. The FPC board is equipped with holes as shown. Use them for removal and insertion by inserting the
tweezers into them as required.
2 Type B
UNLOCK
Unlocked state
Connected state
4 Type D
Connected state
Unconnected state
Connected state
Fig. 2 Connectors for FPC board
Fig. 3 Holes for removal
2
The contact-
piece should
face downwards
Holes
LOCK
Locked state
Connected state