Disassembly Of Optical Ass - Canon PowerShot G11 Service Manual

3.15 Disassembly of OPTICAL ASS'Y-1
(1) Apply voltage (approx. 2.0 V) to the motor terminal to extend the lens barrel until it stops.
(2) Peel off the FRONT CAP TAPE and detach the FRONT CAP.
Note: For the OPTICAL ASS'Y Adjustment jot down the data written on the OPTICAL ASS'Y.
You will need it later.
<Note on Reassembling>
(1) Attach the FRONT CAP TAPE and FRONT CAP as shown in the figure below.
Apply alcohol to the connected section
and detach the FRONT CAP after the
alcohol is fully absorbed.
FRONT CAP TAPE
FRONT CAP
Tweezers
Lens barrel
(2)
Note
(1)
Note on Reassembling (1)
Dowel
27
4
FOCUS PI
marked position
(1)
-
approx.
2 V
MOTOR
FRONT CAP
FRONT
CAP TAPE