Canon PowerShot G11 Service Manual page 64

<Note on Reassembling>
(1) Attach the LCD ASS'Y as shown in the figure below.
Note on Reassembling (1)
STEP 1
Position with respect to the two
dowels and attach the LCD ASS'Y.
LCD WIRE
STEP 2
Insert the LCD WIRE into the CN4001.
STEP 3
Fix the LCD WIRE with DOUBLE-SIDED TAPE by
referring to the attachment position shown in the
figure above.
LCD ASS'Y
c
CN4001
LCD WIRE
DOUBLE-SIDED TAPE
(2 mm × 40 mm)
Dowel
Dowel
Attach the connector by pressing
down the entire surface vertically.
DOUBLE-SIDED TAPE
Hole
Attachment
reference
The DOUBLE-
SIDED TAPE
should not
overlap the hole
and ruled line.
(2 × 40mm) t=0.05mm
TAPE, DOUBLE SIDED NO.7075
CY9-4506-000
12
Connector
CN4001
NG
Do not attach
the connector
obliquely.
(2 mm × 40 mm)
Ruled line
Attachment
reference
Protrusion beyond
the outer shape of
the sheet metal is
not allowed.