Separation Of Side Cover And Strap Base - Canon PowerShot G11 Service Manual

3.2 Separation of SIDE COVER and STRAP BASE

(1) Remove two screws (a × 2) and detach the STRAP BASE.
(2) Remove two screws (a × 2) and detach the SIDE COVER.
<Note on Reassembling>
(1) Attach the SIDE COVER as shown in the figure below.
Note on Reassembling (1)
Sheet metal
SIDE COVER
Insert and attach the SIDE COVER between
the LCD HINGE COVER and the sheet metal.
LCD HINGE COVER
(1)
(2)
SIDE COVER
7
STRAP BASE
(1) - a
(2) - a
a
CD4-3837-000
3.5mm
BLACK
M1.7
(NK GRIP)