Canon PowerShot G11 Service Manual page 75

<Note on Reassembling>
(1) Attach the LITHIUM METAL <2ND> BATTERY as shown in the figure below.
(2) Attach the BATTERY BOX ASS'Y as shown in the figure below.
(3) Attach the MAIN CHASSIS UNIT and TRIPOD BASE as shown in the figure below.
Note on Reassembling (1)
LITHIUM METAL
<2ND> BATTERY
(−)
Note on Reassembling (3)
MAIN CHASSIS
UNIT
Dowel B
TRIPOD BASE
k
Note on Reassembling (2)
BATTERY BOX
ASS'Y
CN403
(B to B)
(+)
Make sure that the ST FPC is inserted into the dowel A,
and then attach the BATTERY BOX ASS'Y by engaging
the two dowels B.
Dowel B
ST FPC
After attaching the TRIPOD BASE to the
MAIN CHASSIS, attach the MAIN CHASSIS
UNIT by engaging two dowels B.
(2) - k
(1) - k
23
h
Dowel A
TRIPOD
BASE