Instructions For Use - Flex LD 18-7 125 R Operating Instructions Manual

Instructions for use

Before switching on the power
tool
 Unpack power tool and accessories
and check that no parts are missing
or damaged.
Adjusting the handle
 Loosen rotary knob for adjusting the handle
by turning it approx. 2 revolutions anti-
clockwise.
 Place handle in the required position
(15° notch).
Ensure that handle engages correctly!
 Tighten rotary knob for adjusting the handle
clockwise.
klqb
fÑ=êÉèìáêÉÇI=íÜÉ=Ü~åÇäÉ=Å~å=ÄÉ=ãçîÉÇ=
íç=íÜÉ=çíÜÉê=ëáÇÉ=çÑ=íÜÉ=ÉäÉÅíêáÅ=éçïÉê=íççäK
20
LD 18-7 125 R/LD 18-7 150 R
Inserting and changing the
sanding tools
t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
 Press and hold down the spindle lock (1.).
 Using the stop key, loosen the clamping
nut on the spindle in an anti-clockwise
direction and remove (2.).
 Insert diamond sanding pad (A) correctly.
 Screw the clamping nut (B), with flange
face up, onto the spindle.
 Press and hold down the spindle lock.
 Tighten the clamping nut with the stop
key.