Ping Property Page
Select the Ping property page to view the signal strength, data rate transmission, test
statistics and to perform data transmission test.
Transmission quality tests send an ICMP ping packet across the network to a selected
address to test data transmission between an adapter and an access point/adapter. The
transmission quality indicates an importance in determining if the adapter should associate
with a different access point/adapter to optimize its transmission capabilities or if the
adapter is properly configured to transmit and receive with that access point/adapter.
Configure the following parameters to conduct a transmission test:
•
Enter an IP address as a dotted string (192.168.10.1). The TCP/IP protocol must
be installed.
•
Select the size of packets sent from the Size pull-down menu.
Figure 9-16. Ping Property Page
Spectrum24 Network Configuration
9-25