Drawer Warmer Section Operational Notes - Wells WV-4HF Supplemental Service Instructions

DRAWER WARMER SECTION - OPERATIONAL NOTES
OPTIONAL
HUMITROL
RACK
PRODUCT
PAN
DRAWER
ASSEMBLY
CAUTION:
BURN HAZARD
Interior of drawer warmer cavity will
be hot during operation. Allow unit
to cool before performing any
service.
NOTE:
In the absence of a drawer warmer
appliance, the WVG-136 is
equipped with a storage cabinet in
the base. This single cabinet has
two doors.
DRAWER
STOP
LATCH
ASSEMBLY
THERMOSTAT
CONTROL
KNOB
OPTIONAL ELECTRONIC CONTROL
POWER
SWITCH
LED READOUT
CONTROL
"PROCESS" KEY
MODULE
INCREMENT AND
DECREMENT KEYS
1. The optional drawer warmer unit is a Wells RW-26HD or
RWT-26HD two-drawer roll warmer unit.
2. The drawer warmer has two individually controllable sections.
a. Control of RW-style unit is via bulb and capillary
thermostat with SPST switch.
b. Control of RWT-style unit is via electronic controller.
3. Each section is heated by a single element of roughly
rectangular configuration.
4. Drawer warmer is powered by the drawer warmer relay
5. Optional dial thermostat may be located on either or both
drawer sections.
6. Digital controller will replace thermometer-equipped units in
new production. Thermometer-equipped units are to become
obsolete.
18
OPTIONAL DIAL
THERMOMETER
CONTROL MODULE
ºF OR ºC
INDICATORS
LOAD
P R O C E S S
INDICATOR