Page 1
Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
LIMITED WARRANTY STATEMENT Unless otherwise specified, all commercial cooking prices charged by Wells Manufacturing for its products are equipment manufactured by Wells Manufacturing is based upon the limitations in this warranty. Seller’s obligation warranted against defects in materials and workmanship...
18 - 19 CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Manufacturing appliance. Proper installation, professional operation and consistent maintenance of this equipment will ensure that it gives you the very best performance and a long, economical service life.
Temperature Control Infinite switch to control temperature of heating element Indicator Light Clows any time temperature control is on Name Plate List manufacturer, model number and serial number, also lists voltage and wattage rating. * = not used on model H706...
PRECAUTIONS AND GENERAL INFORMATION This appliance is intended for use in commercial establishments only. WARNING: This appliance is intended to prepare food for human consumption. ELECTRIC SHOCK No other use is recommended or authorized by the manufacturer or its HAZARD agents.
INSTALLATION NOTE: DO NOT discard UNPACKING & INSPECTION the carton or other packing Carefully remove the hotplate from the carton. Remove all materials until you have protective plastic film, packing materials and accessories from the inspected the appliance for hotplate before connecting the hotplate to electrical power or other- hidden damage and tested it wise performing any installation procedure.
OPERATION GENERAL OPERATIONAL NOTES CAUTION: HOT SURFACES Carefully read the description of the hotplate operation on the specification sheet. Exposed surfaces can be hot DO NOT attempt to perform any maintenance or service unless the to the touch and may cause hotplate is disconnected from electrical power.
CLEANING INSTRUCTIONS CAUTION: PREPARATION ELECTRIC SHOCK Unplug or disconnect hotplate from electrical power before cleaning. HAZARD Allow hotplate to cool completely before cleaning. Disconnect hotplate from electric power before FREQUENCY cleaning. Daily TOOLS CAUTION: Plastic Spatula and Plastic Scouring Pad BURN HAZARD Clean Cloth or Sponge Allow hotplate element and...
Damaged temperature control, element or Contact Authorized Wells Service other internal component Agency for repairs NOTE: There are no user serviceable components in this appliance. In all cases of damage or component malfunction, contact your Authorized Wells Service Agency for repairs.
Page 10
EXPLODED VIEW: H336 H336 BUILT-IN ELECTRIC HOTPLATE - 208/240V - SPIRAL ELEMENT Model: H336 Built-In Electric Hotplate - 208/240V Spiral Element PL222 IL1799 Rev. A 6/24/09...
Page 11
PARTS LIST: H336 H336 Built-n Electric Hotplate, Spiral Element Fig No Part No Description 2C-33977 SCREW, 8-32X3/8-PHBNDHD WS-50293 ELEMENT ASSY KIT, 240V @ 2600W 2N-30293ELUL ELEMENT 240V 2600W 2P-6468 RING-ELEMENT ADAPTOR 2D-30293DT DRIP TRAY P2-31033 BOX CONTROL 2K-31040 BUSHING HEYCO 7/8” OD 2E-30562 SWITCH INFINITE 240V P2-40843...
Page 12
EXPLODED VIEW: H636 H-636 BUILT-IN ELECTRIC HOTPLATE - 208/240V - SPIRAL ELEMENT Nameplate Model: H636 Built-In Electric Hotplate - 208/240V Spiral Element PL222 IL1800 Rev. B 1/21/11...
Page 13
PARTS LIST: H636 H636 Built-n Electric Hotplate, Spiral Element Fig No Part No Description 2C-33977 SCREW, 8-32X3/8-PHBNDHD WS-50293 ELEMENT ASSY KIT, 240V @ 2600W 2N-30293ELUL ELEMENT 240V 2600W 2P-6468 RING-ELEMENT ADAPTOR 2D-30293DT DRIP TRAY 2C-31697 SCREW, 8-32X3/16 PH RD HD 2K-37748X FTG CONDUIT STRAIGHT 3/8 E7-49046...
Page 14
EXPLODED VIEW: H706 H-706 BUILT-IN ELECTRIC HOTPLATE - 208/240V - SOLID (FRENCH PLATE) ELEMENT Model: H706 Built-In Electric Hotplate - 208/240V Solid (French Plate) Element PL222 IL1801 Rev. B 1/21/11...
Page 15
PARTS LIST: H706 H706 Built-In Electric Hotplate, French Plate Fig No Part No Description WS-503973 ELEM HPLATE UPGRADE FUSED WS-503972 HPLATE UPGRADE CRACKED CE 2C-33935 SCREW 6AB X 5/16 PH PAN SMS 2C-31053 NUT 8-32 KEPS MS NICKEL 2C-31697 SCREW 8-32X3/16 PH RD HD...
Page 16
WIRING DIAGRAM WIRING DIAGRAM ELECTRIC COUNTERTOP HOTPLATES H-336...
Page 17
WIRING DIAGRAM WIRING DIAGRAM ELECTRIC COUNTERTOP HOTPLATES H-636, H-656 and H-706...
Drip Tray, 8” for H-636 2D-30293DT For factory authorized service, or to order factory authorized replacement parts, contact your Wells authorized service agency, or call: Wells Manufacturing 10 Sunnen Dr., St. Louis MO 63143 USA Service Dept.
Page 20
WELLS MANUFACTURING 10 Sunnen Dr., St. Louis, MO 63143 telephone: 314-678-6314 fax: 314-781-2714 www.wellsbloomfield.com...