Table of Contents
Advertisement
Autotune
If the radio has been moved, or should additional stations need to be added to the station list, the
"Autotune" function can be used at any time.
Important Note: During the scan process you may find the unit indicates it has found more stations
than the number that appear in the station list, the additional stations that are picked up could be
either.
a.
Secondary stations that are accessed via the secondary button (see later notes) or
b.
Data services provided on DAB that cannot be used on this unit.
DAB operation (contd.)
When "No Dab Service" is shown in the display, Press the Tune/P.Mode button
to perform a scan of the DAB Band 3 UK spectrum and create a new Station
List of all available DAB stations currently broadcasting . This process
usually takes around 15-20 seconds searching the range (11B-12D) used in
the UK During this process, the display will show how many stations have
been found, and on what "channel" they were found: The number of
stations found varies greatly dependant on the area in which the receiver is
located not all stations are available in all areas.
Once the Autotune function has completed the receiver will tune to the first
station in the Station List.
A required station can then be selected using either the "Prev" /"Next" or the
"Up", "Down", "Select" buttons as describe
d later in this manual.
11
Advertisement
Table of Contents
