After Completing The Tire Change; When Using The Temporary Spare Tire - Toyota Tacoma 2013 Owner's Manual

Hide thumbs Also See for Tacoma 2013:
Table of Contents

Advertisement

Then secure the tire, taking care that the tire goes straight up
without catching on any other part, to prevent it from flying for-
ward during a collision or sudden braking.
Stow the tools and jack securely.

After completing the tire change

The tire pressure warning system must be reset. (→P. 351)

When using the temporary spare tire

As the temporary spare tire is not equipped with the tire pressure warn-
ing valve and transmitter, low inflation pressure of the spare tire will not
be warned. Also, if you replace the temporary spare tire after the tire
pressure warning light comes on, the light remains on.
5-2. Steps to take in an emergency
4WD models only: Fasten the
claws of the holding bracket into
the wheel holes as shown in the
illustration.
Holding bracket
Claw
5
425

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents