Cruise Control Can Be Set When; Accelerating After Setting The Vehicle Speed; Automatic Cruise Control Cancelation; If The Cruise Control Indicator Light Flashes - Toyota Tacoma 2013 Owner's Manual

2-4. Using other driving systems

Cruise control can be set when

■
The shift lever is in the D or range 4. (vehicles with 5-speed automatic
●
transmission)
The shift lever is in the D or range 3. (vehicles with 4-speed automatic
●
transmission)
Vehicle speed is above approximately 25 mph (40 km/h).
●

Accelerating after setting the vehicle speed

■
The vehicle can be accelerated normally. After acceleration, the set
●
speed resumes.
Even without canceling the cruise control, the set speed can be
●
increased by first accelerating the vehicle to the desired speed and then
pushing the lever down to set the new speed.

Automatic cruise control cancelation

■
Cruise control will stop maintaining the vehicle speed in any of the following
situations.
Actual vehicle speed falls more than approximately 10 mph (16 km/h)
●
below the preset vehicle speed.
At this time, the memorized set speed is not retained.
Actual vehicle speed is below approximately 25 mph (40 km/h).
●
VSC is activated.
●

If the cruise control indicator light flashes

■
Press the ON-OFF button once to deactivate the system, and then press the
button again to reactivate the system.
If the cruise control speed cannot be set or if the cruise control cancels
immediately after being activated, there may be a malfunction in the cruise
control system. Have the vehicle inspected by your Toyota dealer.
174