To Avoid Damaging The Antenna; Using The Wrench - Toyota Tacoma 2013 Owner's Manual

Hide thumbs Also See for Tacoma 2013:
Table of Contents

Advertisement

3-2. Using the audio system
NOTICE

To avoid damaging the antenna

Remove the antenna in the following situations.
When using an automatic carwash.
When the antenna will touch the ceiling of a garage, etc.
When covering the vehicle with a car cover.
Removing the antenna
For normal driving, make sure the antenna is installed.
When removing the antenna to use an automatic carwash, etc., be careful
not to lose the antenna. Also, make sure to reinstall the antenna before
driving the vehicle.

Using the wrench

When installing or removing the antenna, use the included wrench or a
standard 5/16 in. (8 mm) wrench.
Be careful not to scratch or damage the vehicle body with the wrench.
Do not over-tighten the antenna.
Over-tightening may damage the antenna.
Do not use pliers to install or remove the antenna.
Pliers may damage the antenna's finish.
258

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents