To Create/Delete Discovery Ranges by Start and End IP:
1. Click New Range button to create a new blank entry for providing the IP ranges as shown in the
following screenshot.
2. Enter the IP address ranges in Start and End columns to discover the devices within the specified
range to avoid unwanted device discovery.
3. Click Save to trigger the discovery process. A Confirmation message appears, click Yes to save
the discovery settings successfully or click No to return to the previous screen.
4. Click Reload Discovery Settings, a Confirmation message appears. Click Yes to reload all the
settings to the saved values or click No to return to the previous screen.
Figure 16: Discovery Ranges – Start and End IP
23