Table of Contents
Advertisement
To Create/Delete Discovery Ranges by IP and Subnet Prefix:
1. Click New IP/Prefix button to create a new blank entry as shown in the screenshot below.
2. Enter the starting IP address and Subnet Prefix in the Start IP and Subnet Prefix fields,
respectively.
3. Click Save to trigger the discovery process. A Confirmation message appears, click Yes to save
the discovery settings successfully or click No to return to the previous screen.
4. Click Reload Discovery Settings, a Confirmation message appears. Click Yes to reload all the
settings to the saved values or click No to return to the previous screen.
5. Select a required entry and click Delete IP/Prefix button to delete a discovery range.
Click Save to commit all changes.
The discovered devices in the device tree are unauthenticated devices. To authenticate these devices,
the user has to select the required unauthenticated devices and provide the corresponding user
credentials to identify the devices as SCX Device.
Figure 18: Create New IP/Prefix
25
Advertisement
Table of Contents
