Table of Contents
Advertisement
Cause Codes
Cause codes are not specific to any plug-in, and provide a generic descriptive cause for an event.
Cause
Code
Start
When an application is started, this cause will be logged.
Stop
When an application is stopped, this cause will be logged.
Pause
When an application waits for few seconds, this cause will be logged.
Resume
When an application gets started from the pause state, this cause will be
logged.
Threshold
Whenever a health of a device is in warning or critical state, this cause will
be logged.
Open
When an application is opened, this cause will be logged.
Close
When an application is closed, this cause will be logged.
Modified
When there is a change in Power status or health threshold for the devices,
this cause will be logged.
Running / In
When an application or process is in run state, this cause will be logged.
Progress
Complete
Whenever an action is completed, this cause will be logged.
Failed
When the devices go to the off state, this cause will be logged.
Succeeded
When an application is logged successfully, this cause will be logged.
Added
When a device is added in a device tree, this cause will be logged.
Removed
When the user wants the unwanted device to be removed from the device
tree, this cause will be logged.
Ignored
When the user wants the unwanted device to be ignored from the device
tree, this cause will be logged.
Restarted
When the service is restarted, this cause will be logged.
Description
85
Advertisement
Table of Contents
