Table of Contents
Advertisement
5. Select a required discovery range and click Delete Range button to delete a discovery range.
Click Save to commit all changes. Entries are limited to 256 addresses.
To Create/Delete a Single IP:
1. Click New IP button to create a new blank entry as shown in the screenshot below.
2. Enter the IP address in the IP field.
3. Click Save to trigger the discovery process. A Confirmation message appears, click Yes to save
the discovery settings successfully or click No to return to the previous screen.
4. Click Reload Discovery Settings, a Confirmation message appears. Click Yes to reload all the
settings to the saved values or click No to return to the previous screen.
5. Select a required IP address and click Delete IP button to delete an IP address.
Click Save to commit all changes. The single IP addresses may have also been added manually
or created with the Add Device function.
Figure 17: Create New IP
24
Advertisement
Table of Contents
