Table of Contents
Advertisement
Use the controls below to launch Discovery settings, Authentication Manager, or change the Ignored
status of an IP.
Button Options
IP Address
Protocols such as
AMT, Windows OS
Manageability
Status
The manageability status of the detected IPs is displayed on the left-hand bottom side of the page.
Button Options
Description
Allows the user to dispatch Wake-On-LAN command for the
selected IPs.
Adds an IP address to allow the server to discover the associated
devices.
Allows the user to set ignore state for the selected IPs.
Allows the user to undo the ignore state for the selected IPs.
Indicates the list of available IP addresses.
Indicates the detected protocols such as AMT, Windows OS, and
Linux OS that are currently installed.
Indicates the current manageability status of the IP. For a device to
be considered managed, at least one protocol must authenticate
successfully. If any IPs are ignored, their status will be reflected
here as well.
Description
Indicates the devices that support at least a single manageability.
Indicates the devices that cannot authenticate or support any
protocol.
Indicates the devices that are ignored.
Indicates the devices that are not licensed.
48
Advertisement
Table of Contents
