Table of Contents
Advertisement
2. Click Add New button to add the credentials as shown in the screenshot below.
3. Enter the name of the user in Name text box.
4. Enter the user password in Password text box.
5. Enter the same user password in Confirm Password text box as in Password text box.
6. Select the privilege rights to be Administrator or User or Operator or KVM from the Privilege
drop-down box.
7. Check the Enabled checkbox to identify the status of the user. If checkbox is not checked, it will
give a message "The user has been disabled" while logging the VDM Pro application.
8. Click Save to save the new credentials successfully.
To edit user:
1. Click VDM Pro Options > VDM Pro Users > VDM Pro Users to edit the user credentials to avoid
unwanted users from accessing the account.
2. Select the required user and click Edit button. An Edit User window is displayed. By default,
Name text box is disabled.
3. Enter user password in Password and Confirm Password text boxes.
4. Select the privilege rights to be Administrator or User or Operator or KVM from the Privilege
drop-down box.
5. Check the Enabled checkbox to identify the status of the user. If checkbox is not checked, it will
throw a message "The user has been disabled" while logging the VDM Pro application.
6. Click Save to save the user credential changes successfully.
To delete user:
1. Click VDM Pro Options > VDM Pro Users> VDM Pro Users to delete any one of the required
user.
2. Select the required user and click Delete button to delete the selected user successfully.
Figure 23: Add User
29
Advertisement
Table of Contents
