Work Break - Fakir S 350 Instructions For Use Manual

Hide thumbs Also See for S 350:

Available languages

Work break

The suction capacity can also be adjusted with the suction

controller [26] on the handle of the suction hose. Use this

controller (slider) only for short-term reduction of the suction

capacity. For normal suction, however, you should keep this

closed.

Use the Minus field [22] for the permanent reduction of the

suction capacity. Save energy.

Filter change indication [27]: In case of full dust bag or fil-

ters, as well as with clogged up accessories (hose, tube,

nozzle), the filter change indication lights up. In this case,

replace the dust bag and/or the clogged up filters, or remo-

ve the stoppage.

In case of utilization of the turbo mattress brush or the cre-

vice nozzle, it can be that the filter change indication lights

up before dust bag or filter are full. This depends on tech-

nical conditions and does not represent any impairment of

function.

Device plug connection [28] in the finger grip of the handle

for the connection of an optionally available electrical suction

brush.

Suction tube stowage position with automatical suction

disconnection

Use the stowage holder in order to securely retain the sucti-

on tube during breaks. For this, insert the stowage holder

[29] of the floor suction nozzle into the nozzle holder bracket

on the rear of the device; the motor is switched off automa-

tically in this case.

Bedienung

Operation

NOTICE!

Table of Contents