Advertisement
FITTING THE CAR SEAT WITH THE 3-POINT LAP & DIAGONAL
SEAT BELT
9-18 kg (approx. 9 months to 4 years)
STEP 1
STEP 4
Step. 1: Place the child safety seat on the vehicle's seat ensuring it is firmly pressed
against the car seat backrest.
Step 2: Thread the car seat belt in through the seat belt route slot in the seat's plastic
backrest furthest from the car's seat belt buckle, and then out through the other seat belt route
slot and fasten it into the seat belt buckle.
Step 3: Check the webbing of the seat belt has not become twisted or tangled and that the
lap belt goes under the armrest and the diagonal belt under headrest belt guide then goes over
the red belt guide on the side of the backrest.
Step 4: Place your knee on the base of the safety seat and grip the top piece of seatbelt
webbing. Pull the webbing upwards to tighten the seat belt.
Step 5: Finish tightening th webbing by pulling the diagonal strap upwards until there is no
slack and the seat is held firmly in place. Now you can strap your child into the seat.
Make sure the seat belt has not become twisted. Also check that th cover is not impeding
the movement or fit of the seat belt webbing in any way.
To release your child seat follow the above instructions in reverse order.
STEP 3
fig. 8
7
STEP 2
STEP 5
Advertisement
