Headlight Bulb Replacement - Panasonic MC-UG589-00 Service Manual

MC-UG589-00
across the lower plate. If the bristles on the agitator
assembly do not touch the card you should replace all the
brushes for best cleaning results.
3.5.1. Removal
1. Remove the lower plate as outlined in the LOWER PLATE
REPLACEMENT section.
2. Remove the agitator assembly as outlined in the agitator
assembly section.
3. The agitator assembly may now be disassembled and the
brushes replaced.
4. Carefully remove the E-clip from the agitator shaft, do not
misplace. Remove the right brush support. Pull the agitator
shaft out of the opposite end of the.
5. Pull or pry out the agitator pulley and agitator holder.
6. Push each brush out of the agitator.
7. Install new brushes by reversing procedure.
8. Reinstall agitator holder and agitator pulley completely.
9. Reinstall the agitator shaft, end cap and E-clip.
10. Position belt over agitator pulley on the agitator.
11. Reinstall agitator and lower plate.
3.6.

Headlight Bulb Replacement

1. Pry up window at slots.
2. Remove old bulb from the socket by pushing in while
turning counter-clockwise.
12